• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ENGINE MOUNTS AND BRACKETS REPLACEMENT INSTRUCTIONS (cont)
ENGINE MOUNTS AND BRACKETS REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_189

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  166    167    168    169    170  171  172    173    174    175    176  
TM 5-1940-277-34 ENGINE MOUNTS AND BRACKETS REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS REMOVAL 1. Drive shaft (1) 4 bolts (2), Remove if Use 10 mm socket, 8 washers (3), replacing 6 in extension 4 nuts (4), engine mount. with 1/4 in 2 spacers (5) drive, ratchet. and drive shaft and 10 mm box guard top plate wrench. (6) 2. Engine compartment 9 rivets (8) a. Drill out Use portable securing rivets. electric drill access cover with 1/4 in bit (9) and (only required flotation for replacement blocking of outboard bracket (7) mount). b. Remove cover and bracket. 3. Engine assembly a. 4 nuts (10) a. Remove for Use 1-1/16 in and 4 engine mount socket, 6 in washers (11) replacement. extension, 1/2 in drive ratchet. b. Loosen for bracket replacement. 2-163







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.