• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ENGINE ASSEMBLY REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_205
ENGINE ASSEMBLY REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_207

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  184    185    186    187    188  189  190    191    192    193    194  
TM 5-1940-277-34 ENGINE ASSEMBLY REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS 7. Rocker arm Breather hose (23) Loosen damp Use screwdriver. cover (22) and disconnect. 8. Exhaust pipe Exhaust bellows Loosen damp Use 1/2 in box (24) (MK1) (25) and disconnect. wrench. 9. Exhaust return a. 4 bolts (27) Remove. Use 1/2 in pipe (26) and washers socket and 3/8 (MK2) (28) securing in ratchet. exhaust return pipe to turbo- charger b. 4 bolts (29), Remove and Use 1 in socket, washers (30), withdraw 112 in ratchet, and nuts (31) exhaust return and 12 in open securing pipe. end box wrench. exhaust return pipe to flexi- ble connection 10. Engine Wiring looms Disconnect from See page 2-93 assembly (32) to engine and all points on for instructions screened alternator engine and figure. loom assembly. 11. Engine mounts 4 nuts (34) and 4 Remove. Use 1-1/8 in (33) washers (35) socket, 6 in extension, 1/2 in ratchet. 12. Engine a. Fresh water Remove. assembly (32) filler cap (36) b. 3 petcocks (37, a. Open, drain 38, and 39) cooling system into suitable container. b. Close when system drained. c. Fresh water Reinstall. filler cap (36) Change 7       2-183







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.