• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
STARTER MOTOR REPAIR INSTRUCTIONS (Continued) - TM-5-1940-277-34_217
STARTER MOTOR REPAIR INSTRUCTIONS (Continued) - TM-5-1940-277-34_219

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  196    197    198    199    200  201  202    203    204    205    206  
TM 5-1940-277-34 STARTER MOTOR REPAIR INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS f. 2 through Unscrew and Use flat tip screws (18) remove. screwdriver. and 2 washers (19) g.   Commutator Tap lightly Keep shims (20) end shield with non- to simplify end (5) and shim metallic hammer float adjustment washers (20) and remove from upon reassembly. end of armature shaft. 3. Drive end a.   Drive end Tap, lightly, Use non- shield (1) shield (1) away from yoke metallic hammer. with armature (21) and withdraw. (22) b.   Armature (22) Mount in soft jawed vise. c.   Pinion stop Remove. Use 13/16 in box nut (23), wrench. thrust washer (24) and pinion spring (25) d.   Lubricator a.   Remove. Use punch and core plug (26) ball peen ham- and spring mer. (27) b.   Discard Use new plug when plug. reassembling. e.   Pinion (28) a.   Push end and drive end shield toward shield (1) armature to release locking mechanism. 2-195







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.