TM 5-1940-277-34
STARTER MOTOR REPAIR INSTRUCTIONS
(Continued)
LOCATION
ITEM
ACTION
REMARKS
11. Commutator end
Commutator end
a.
Check that
shield (5)
bearing (68)
bearing (68)
is tight in
its housing.
b.
Check side play
between arma-
ture shaft (69)
and bearing (68).
c.
Replace bearing
if side play
exists or fit
in housing not
tight;
• Press bear-
Use hand press.
ing out of
end shield.
• Smear new
bearing
lightly with
oil.
• Press new
bearing into
end shield.
• Measure
Use micrometer
bore.
calipers, inside.
2-207
