• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
STARTER MOTOR REPAIR INSTRUCTIONS (Continued) - TM-5-1940-277-34_247
STARTER MOTOR REPAIR INSTRUCTIONS (Continued) - TM-5-1940-277-34_249

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  226    227    228    229    230  231  232    233    234    235    236  
TM 5-1940-277-34 STARTER MOTOR REPAIR INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS b. Seal joint Smear joint with between. light coat of grease. 31. Armature (22) a. 2 screws (3), a. Install Use 5/16 in and drive end 2 lockwashers washers and socket and shield assembly (4) and 2 screws secur- ratchet. (1) (new) core ing tags (73) plugs (2) from field windings (72). b. Install core Use drift pin plugs sealing and ball peen opening in hammer. drive end shield. b. Shim Fit original washers (20) washers on armature shaft. c. Commutator Fit onto shaft. end shield (5) d. 2 through Insert and Use flat tip screws (18) tighten. screwdriver. and washers (19) 32. Starter a. Starter Hold vertically with commutator end shield up. b. Shim Fit original washers (17) washers onto shaft. c. Thrust Fit onto shaft. washers (16) 2-225







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.