• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
FUEL INJECTOR
ELECTRICAL SYSTEM (24 Volts Direct Current)

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  4    5    6    7    8  9  10    11    12    13    14  
TM 5-1940-277-34 TM 5-1940-34/3 Model 10-18-002 Type Hydraulically clutched forward- reverse trans- mission Rotation Counterclockwise Forward-reverse selection Hydraulic fluid direction to clutches by selec- tor valve inside transmission Front oil pump Positive displacement gear type (driven at engine speed) Oil type Engine oil Oil pressure (normal) 110.0 to 150.0 pounds per square inch (7.7 to 10.5 Kp/cm2) Oil pressure (maximum) 250.0 pounds per square inch (17.5 Kp/cm2) Oil temperature (normal) 155° to 165° Fahrenheit (68.3 to 73.8°C) Regulator valve spring weight 98 to 108 pounds at 1-1/16 inch height (44.5 to 49.1 Kg at 2.7 cm) STEERING PROPULSION SYSTEM Manufacturer Dowty Hydraulic Units Limited Cheltenham, England Type Hydrojet, 12 inch (300 mm) diameter, two stage with scoops for reversing water flow and nozzles that swing through an angle of 40 degrees either side of central position for steering Steering Through cable control from helm in front cockpit to steering assembly portion of the hydrojet unit Change 4   1-9







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.