• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ASSEMBLE (cont) - TM-5-1940-277-34_267
INJECTION PUMP REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_269

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  246    247    248    249    250  251  252    253    254    255    256  
TM 5-1940-277-34 INJECTION PUMP REPLACEMENT INSTRUCTIONS This task covers: a. Removal b. Installation INITIAL SETUP Tools: Equipment Condition: Condition Description: 3/4 in open end wrench 5/8 in open box/end TM 5-1940-277-20 Engine hatch covers wrench raised. 1/2 in box/open end wrench 9/16 in socket Ratchet 6 in extension 3/8 in hex key wrench (Allen) NOTE Modify hex key wrench if required.  Refer to Appendix C, Figure C-4. Flat tip screwdriver, 6 inch 15/16 in socket Inspection mirror Hinge handle Long nose pliers 11/32 in box/open end wrench 1/8 in drill bit NOTE A piece of 1/8 in brass rod may be used.  Refer to Appendix C, Figure C-5. Flashlight Materials/Parts: Injection pump O-ring Engine oil Personnel Required: Two Change 6           2-245







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.