• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
STEERING ASSEMBLY REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_391
STEERING ASSEMBLY REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_393

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  370    371    372    373    374  375  376    377    378    379    380  
TM 5-1940-277-34 TM 1940-34/3 STEERING ASSEMBLY REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS 15. Tail pipe (25) a. Transom Smear with Use hands.  Jack rubber seal grease and may be removed ring (16) gently press for better into position. accessibility. CAUTION Do not over tighten nuts to avoid stripping threads. b. Transom Place ring into Use IN9 14 mm sealing ring position and wrench, torque (12), 12 tuf- install washers nuts (13) to 12 nol washers and nuts. lb-ft + 5 lb ft (15), 12 steel (16-27N-M + 6.8N- washers (14), M). 12 nuts (13) NOTE It may be necessary to loosen pump bolts to align transom seal "0" ring. 16. Outboard steering a. Pivot bolt Install bolt Use 17 mm wrench lever (6) (10), washer with washer on and 17 mm socket (9), steering to connect out- with ratchet. link (11), board steering tufnol washer lever (6) and (9), steel steering link. washer (8), Install washers nut (7) and nut and tighten. b. Reverse Position on top balance of outboard lever (5) reverse lever (31) making certain one steel (3) and one tufnol (4) washer are between the levers. c. Reverse Install tufnol Use 19 mm open control washer (4), end wrench and pivot (1) steel washer (3) 19 mm socket with and nut (2). ratchet. Change 4 2-379







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.