• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
ROTARY CONTROL ASSEMBLY REPLACEMENT INSTRUCTIONS (cont)
NSTALLATION

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  407    408    409    410    411  412  413    414    415    416    417  
TM 5-1940-277-34 ROTARY CONTROL ASSEMBLY REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS REMOVAL 1. Rotary control a. Control a. Remove pivot Use two 17 mm assembly (1) rod (3) nut (2). wrenches. b. Remove control rod (3) from crank (4). b. Rotary a. Remove and Use 1/2 in control retain 4 nuts socket and 1/2 assembly (1) (5), washers in open end (6) and bolts wrench. (7). b. Remove rotary Use hands. control assem- bly (1). INSTALLATION 2. Rotary control a. Rotary a. Position assembly (1) control assembly (1). assembly (1) b. Install and Use 1/2 in tighten 4 socket and 1/2 bolts (7), in open end washers (6) wrench. and nuts (5). b. Control a. Install onto Use two 17 mm rod (3) crank (4). wrenches. b. Install and Use two 17 mm tighten pivot wrenches. nut (2). 2-421







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.