• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
FUEL TANK REPLACEMENT INSTRUCTIONS (Continued) - TM-5-1940-277-34_73
FUEL TANK REPLACEMENT INSTRUCTIONS (Continued-)

TM-5-1940-277-34 Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 (1940-01-105-5728) Manual
Page Navigation
  52    53    54    55    56  57  58    59    60    61    62  
TM 5-1940-277-34 FUEL TANK REPLACEMENT INSTRUCTIONS (Continued) LOCATION ITEM ACTION REMARKS REMOVAL: 1. Fuel tank (1) Fuel tank (1) Empty by: Use hand operated dispensing pump or suction pump. a. Pumping from filling pipe (2), or b. Isolate at main valve (3), discon- nect fuel lines (4) downstream of valve, con- nect suction hose and pump. 2. Forward cockpit a. Center line a. Drill 44 ea. Use 1/4 in drill deck plate rivets (6) bit and 3/8 in (5) until head drill. pops off. b. Punch rivet Use 1/4 in punch through hole. and hammer. c. Remove. b. Tie bar (7), Remove. Use 1/2 in box 2 nuts (8), wrench and 1/2 in 2 washers (9), open end wrench. and 2 bolts (10) 3. Fuel tank (1) a. 6 ea. fuel Disconnect. Use 5/8 in open lines at end box wrenches. connections (11, 12) 2-41







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.