• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
SECTION I. INTRODUCTION - TM-5-1940-277-34P_10
Maintenance Code - TM-5-1940-277-34P_12

TM-5-1940-277-34P Boat Bridge Erection Twin Jet Aluminum Hull Model USCSBMK1 NSN 1940-01-105-5728 USCSBMK2 NSN 1940-01-218-9165 Manual
Page Navigation
  1  2  3    4    5    6    7  
TM 5-1940-277-34P TM 1940-34P/5 (1)    Source  Code.  The  source  code  tells  you  how  to  get  an  item  needed  for  maintenance,  repair,  or overhaul of an end item/equipment. Explanations of source codes follows: Source Code Explanation PA Stocked items; use the applicable NSN to request/requisition items with these PB source codes. They are authorized to the category indicated by the code PC** entered in the 3rd position of the SMR code. PD PE **NOTE: Items coded PC are subject to deterioration. PF PG KD Items with these codes are not to be requested/requisitioned individually. They KF are part of a kit which is authorized to the maintenance category indicated in the KB 3rd position of the SMR code. The complete kit must be requisitioned and applied. MO - (Made at Unit/AVUM Items with these codes are not to be requested/requisitioned Level) individually. They must be made from bulk material which MF - (Made at DS/AVUM is identified by the part number in the DESCRIPTION and Level) USABLE ON CODE (UOC) column and listed in the Bulk MH - (Made at GS Level) Material group of the repair parts list in this RPSTL. If the ML - (Made at Specialized item is authorized to you by the 3rd position code of the SMR Repair Activity (SRA)) code, but the source code indicates it is made at a higher MD - (Made at Depot) level, order the item from the higher level of maintenance. AO - (Assembled by Unit/AVUM Items with these codes are not to be requested/ Level) requisitioned individually. The parts that make up AF -  (Assembled by DS/AVIM the assembled item must be requisitioned or Level) fabricated and assembled at the level of AH - (Assembled by GS maintenance indicated by the source code. If the Category) 3rd position code of the SMR code authorizes you AL -  (Assembled by SRA) to replace the item, but the source code indicates AD - (Assembled by Depot) the items are assembled at a higher level, order the item from the higher level of maintenance. XA - Do not requisition "XA"-coded item. Order its next higher assembly. (Refer to the NOTE below.) XB - If an "XB" item is not available from salvage, order it using the CAGEC and part number given. XC - Installation drawing, diagram, instruction sheet, field service drawing, that is identified manufacturer's part number. XD - Item is not stocked. Order an "XD"-coded item through normal supply channels using the CAGEC and part number given, if no NSN is available. NOTE Cannibalization  or  controlled  exchange,  when  authorized,  may be used as a source of supply for items with the above source codes,  except  for  those  source  coded  "XA"  or  those  aircraft support items restricted by requirements of AR 750-1. 2







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.