ENGINE DRIVEBELT REPLACEMENT (Contd)
Keep hands out of path of spring-loaded tensioner. Failure to
comply may result in injury to personnel.
The drivebelt tensioner is spring loaded and must be pivoted
away from the drivebelt. Failure to comply may result in damage
The drivebelts on both engines are replaced the same way.
This procedure covers replacement of one drivebelt.
Note how drivebelt is installed on pulleys to assist with
Use a 1/2-inch square drive ratchet to turn tensioner arm (1) off drivebelt (2).
Remove drivebelt (2) from engine (3).
Use a 1/2-inch square drive ratchet to turn tensioner arm (1)
Install drivebelt (2) on engine (3).
Remove 1/2-inch square drive ratchet from tensioner arm (1).
Close engine hatches (TM 5-1940-322-10).
1/2-INCH SQUARE DRIVE
END OF WORK PACKAGE