TRANSMISSION FILTER SCREEN MAINTENANCE (Contd)
Clean transmission filter screen every time transmission oil is
changed. Failure to comply may result in damage to transmission.
Both transmission filter screens are replaced the same way. This
procedure covers the replacement of one transmission filter screen.
Have container ready to catch transmission oil.
Remove transmission filter screen plug (3) and O-ring (2) from transmission housing (1). Discard
Remove transmission filter screen (4) from transmission housing (1).
CLEANING AND INSPECTION
For general cleaning and inspection instructions, refer to WP 0013 00.
For general transmission inspection, refer to WP 0165 00.
Skysol 100 solvent is combustible; DO NOT use or store near heat,
sparks, flame, or other ignition sources. Use mechanical ventilation
whenever product is used in a confined space, heated above
ambient temperatures, or agitated. Keep container sealed when not
Contact with Skysol 100 may cause skin irritation. Use chemical-
resistant gloves. In case of skin contact, remove any contaminated
clothing and wash skin thoroughly with soap and water. Wash
contaminated clothing before reuse. Eye contact may cause
irritation, tearing, or blurring of vision. Use face shield or goggles
when eye contact may occur. In case of eye contact, flush eyes with
large amounts of water for at least 15 minutes or until irritation
subsides. Inhalation may cause irritation to upper respiratory
passages. DO NOT have food or drink in the vicinity. Failure to
comply may result in injury to personnel.
Clean filter screen (4) with Skysol 100 and dry with cloth.
Inspect filter screen (4) for tears, cracks, or holes. Replace if damaged.
Inspect filter screen plug (3) for damaged threads. Replace if damaged.
Inspect transmission housing (1) for damaged plug hole threads.