TM 5-1940-322-24
0152 00
PISTON AND CONNECTING ROD MAINTENANCE (Contd)
INSTALLATION
1.
Install bearings (11) and (12) on rod (8) and cap (9).
CAUTION
Take care when installing piston and rod assembly in cylinder bore.
Failure to comply may result in damage to cylinder bore.
2.
Position piston and rod assembly (16) in cylinder bore (17).
3.
Push piston and rod assembly (16) into cylinder bore (17) until top of piston and rod assembly (16) is
approximately 2 in. (5 cm) below neck or contacts crankshaft.
4.
Apply coat of engine oil to threads of screws (10).
NOTE
Rotate engine horizontally to install piston and connecting rod
assembly.
5.
Install rod cap (9) on piston and rod assembly (16) with screws (10).
a. Tighten screws (10) to 26 lb-ft (35 Nm).
b. Tighten screws (10) to 51 lb-ft (70 Nm).
c. Tighten screws (10) to 73 lb-ft (100 Nm).
6.
7.
8.
9.
2
16
3
6
7
5
4
1
18
8
13
17
6
9
14
12
11
10
15
10
9
GEAR
BARRING
TOOL
END OF WORK PACKAGE
0152 00-7/(8 blank)