TM 5-2090-202-12&P
TM 2090-12&P/1A
2-4. LOADING-Continued
g. Remove the retainer (1), from bolt (2), and remove the bolt (2) and the cable retainer block (3).
h. Place the boom cable (4) on the sheave (5).
i. Thread the winch cable (1) through the hole in the base of the
dolly (2)and connect winch cable hook (3) to the base of the dolly (4).
WARNING
Install cable retainer block so that the rounded
corner is facing forward and down against the
cable. Improper installation of the block will
cause cable failure. Serious injury may result if
cable fails.
2-5