k. Continue to rewind the boom cable (5) with winch
control lever and lower the boom with the boom control lever
so that the boat and cradle are fully retrieved.
l. Pull hydraulic pin lever to engage the forward locking
pin. Engage dolly retainer.
m. Return hand throttle to idle; depress the clutch pedal;
and lift the control lever to disengage the power take-off. Refer
to TM 5-5420-209-12.
n. Move the transporter to a suitable site.
o. Attach six tie down (3 on each side) cables (6) to secure
the boat to the cradle and transporter. Tighten the cables (6)
with turnbuckles (7). Install safety pin near boom locking pin.
Remove front stanchions.
p. Have boat operator and crew remove the cab and lower
light mast in accordance with TM5-1940-277-10.