• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Section II. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES

TM-5-2090-202-12-P Cradle Bridge Erection Boat Twin Jet Aluminum Hull (2090-01-106-9789) Manual
Page Navigation
  26    27    28    29    30  31  32    33    34    35    36  
TM5-2090-202-12&P
TM 2090-12&P/1A
3-9. LUBRICATION ORDER
For lubrication, refer to L05-2090-202-12/LI 2090-12/1. See Appendix A.
Section IV. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
3-10. INTRODUCTION
Perform the preventive maintenance checks and services in the following tables as specified.
Report any
deficiencies in accordance with DA Pamphlet 738-750.
Any surfaces where corrosion is detected should be treated, primed, and coated in accordance with TM 43-0139, using
Items 3-6, Appendix F, within 6 months. In saltwater or high-humidity environments, or during periods of frequent
precipitation (3 or more times per week), increase frequency of inspection from quarterly to monthly, and correct
corrosion within one month of detection. Where corrosion recurs in subsequent inspections after correction, retreat,
prime and coat AND submit SF 368, Product Quality Deficiency Report (QDR), indicating that recurrent corrosion is a
problem.  Try to be specific as to where it is occurring, and what type of corrosion is occurring (e.g. pitting, rust,
bubbling). Whenever possible, include color photos of the corroded area to facilitate investigation of the problem.
NOTE
The presence of the boat on the cradle makes thorough inspection difficult.
Therefore, the cradle inspection should be done after the boat has been
launched.
3-4






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.