• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
LAUNCHING, FAST WATER - Continued
LAUNCHING, FAST WATER - Continued

Cradle, Bridge Erection Boat, Twin Jet, Aluminum Hull \(Nsn 2090-01-106-9789\)
Page Navigation
  21    22    23    24    25  26  27    28    29    30    31  
img
TM5-2090-202-12&P
TM 2090-12&P/1A
2-10. LAUNCHING, FAST WATER - Continued
i. Push the winch control lever to release the
pressure on the winch cable (16), remove the shackle
from the boat keel (17) and hook (18). Pull the winch
cable (15) free of cradle and place on top of the
transporter cab, insuring that the winch cable is free of
cradle and boat.
j. Release the parking brake and brake lock and
allow the transporter to roll back into the water. Stop
when the bottom of the boom touches the water. Reset
parking brake and brake lock. (For M812 transporter
chassis, refer to TM 9-2320-260-10, for M945 chassis,
refer to TM 9-2320-272-10).
WARNING
Failure  to  engage  both  the
parking brake and the brake lock
could result in injury or death.
k. Push the hydraulic pin lever to release the pin
and allow the cradle to roll off into the water. Push the
boom control lever to raise the boom no more than 3
feet. Cradle will rest against the rear stop brackets.
l. After the boat is launched, release safety line
and release the brakes. Drive the transporter forward
slowly until the cradle is clear of the water.
2-22






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.