3-1. UNPACKING AND CHECKING THE EQUIPMENT - Continued
(3) Install left and right stanchion base (7)
with flat washers (8) and bolt (9),
lockwashers (10) and nuts (11).
(4) Install rear stanchion (12) with beveled
top facing inboard, secure stanchions with
f. Perform the following at the transporter:
(1) Install the left and right upper half of the
inboard roller assemblies (1) on the rear
of transporter (2). Secure upper half of
roller (1) to base of boom (3) with washer
(2) Install lower half of inboard roller
assemblies (8) with bolts (9), flatwashers
3-2. SERVICING THE EQUIPMENT
a. Perform the preventive maintenance checks and services contained in the PMCS Table.
b. Lubricate all points as shown in LO 5-2090-202-12/LI 2090-12.
c. Schedule the next preventive maintenance checks and services on DD Form 314, Preventive Maintenance
Schedule and Record.
d. Report all deficiencies on SF 368 if the deficiencies appear to involve unsatisfactory design. Marine Corps users
submit forms as prescribed by TM 4700-15/1.