TM 5-5420-202-20-2
AIR CLEANER (ALUMINUM) CENTRIFUGAL FAN HOSE REPLACEMENT (Sheet 1 of 1)
TOOLS: Flat-tip screwdriver
SUPPLIES:
Silicone compound (Item 32, Appendix D
PRELIMINARY
PROCEDURES:
REMOVAL:
Using screwdriver, loosen two clamps (A).
1.
Slide clamps (A) onto hose (B).
2.
Remove hose (B) from centrifugal fan (C)
3.
and housing (D).
4.
Inspect hose (B) and clamps (A). Replace as
necessary.
INSTALLATION:
Position clamps (A) onto hose (B).
1.
2.
Coat inside diameter of hose ends with silicone
compound and install hose (B) to centrifugal fan
(C) and housing (D).
Slide clamps (A) to ends of hose. Using screwdriver, tighten clamps (A).
3.
4.
5.
End of Task