TRANSMISSION SHROUD REPAIR (Sheet 2 of 6)
Using 7/16 inch socket, remove six screws (A), lockwashers (B) and flat washers (C)
holding retainer (D) to transmission shroud (E).
Remove retainer (D) from shroud (E).
Remove seal assembly (F) from shroud (E).
Using 7/16 inch socket and 7/16 inch wrench, remove five screws (G), 10 flat washers (H),
and five self-locking nuts (J) holding seal (K) to transmission shroud (E) both right
and left sides.
Remove seal assembly (K) from shroud (E).
Go on to Sheet 3