HIGH VOLTAGE IR POWER SUPPLY AND SHOCK MOUNT ASSEMBLY REPLACEMENT
(Sheet 2 of 6)
Using 7/8 inch wrench, disconnect
cable (A) from power supply (B).
2. Using 1 inch wrench, disconnect
cable (C) from power supply (B).
Using 1/2 inch socket and extension, remove four screws (D) and lockwashers (E)
securing power supply (B) to mounting pad (F).
Remove ground strap and lockwasher (G).
Remove clamp (H) and lockwasher (J).
Remove power supply (B) from mounting pads (F).
GO on to Sheet 3