LEFT TAILLIGHT - STOPLIGHT ASSEMBLY REPAIR (Sheet 3 of 3)
Insert three leads (A) through body assembly (B).
Install socket and wiring assembly (C) by pressing in grommet (D).
3. Using cross-tip screwdriver, install three screws (E).
4 . Using cross-tip screwdriver, install two screws (F) and lockwashers (G).
Install three lamps (H) and (J).
Coat preformed packing gasket (K) with silicone compound
Place new preformed packing (K) on door assembly (L).
Wires are located at the bottom
of housing (B) for positioning
of door assembly (L).
8. Using flat-tip screwdriver, install six screws (M), door
assembly (L), and six retainer rings (N) on body assembly (B).
End of Task