POWER RELAY CABLE ASSEMBLY REPLACEMENT (Sheet 2 of 5)
Some vehicles may have a cable tie
instead of strap (C). If your vehicle
has a cable tie, remove it and go on
to step 3.
Strap and covers should be left in
place by removing only one screw.
required, remove both screws.
Using 7/16 inch wrench, remove screw
(D), lockwasher (E), and flat washer (F)
from strap (C).
Using 7/16 inch wrench, remove screws
(J) from three straps (K).
Go on to Sheet 3