FUEL TANK CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT (RIGHT)
(Sheet 2 of 5)
Lift cover (B) with fuel pump (D) from tank.
Using fingers, disconnect cable (E) from fuel pump (D) by pulling out.
Rest cover (B) in original position
on fuel tank.
Using fingers, disconnect cable (F) from
electrical connector (G) by pulling out.
Using diagonal pliers, remove lockwire (H)
from four screws (J).
Using screwdriver, remove four screws
and washers (J) holding housing (K) to
Slowly separate capacitor and housing
(K) from cover (L). Capacitor and
housing (K) are connected to cover (L)
with an electrical lead.
Using screwdriver, remove screw (M),
washer (N), electrical lead (P) and
gasket (Q) from adapter (R). Discard
Using cutting pliers, remove lockwire
(S) from screws (T).
Using socket, remove eight screws
and washers (T).
Remove cover (U) and gasket (V) from fuel
tank. Discard gasket.
Go on to Sheet 3