TM 5-5420-202-20-3
TRANSMISSION MAIN OIL FILTER ELEMENT REPLACEMENT (Sheet 1 of 7)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
Installation
TOOLS: 9/16 in. socket with 1/2 in. drive
Diagonal cutting pliers
7/16 in. socket with 1/2 in. drive
Putty knife
5 in. extension with 1/2 in. drive
Slip joint pliers
1 in. combination box and open end wrench
Snapring pliers
Torque wrench with 1/2 in. drive
SUPPLIES:
Filter cover gasket
Gloves (Item 69, Appendix D)
Clean rags (Item 65, Appendix D)
Goggles (Item 70, Appendix D)
Dry cleaning solvent (Item 55, Appendix D)
Locking wire (Item 61, Appendix D)
Two 1/4 in. x 20 NF x 3 in. long bolts
PRELIMINARY PROCEDURES:
Remove transmission shroud (page 9-2)
REMOVAL:
NOTE
Some filter assemblies are secured with nuts and threaded
1. Using 9/16 inch socket with 5 inch extension, remove 10 bolts (A) and lockwashers
(B) holding filter assembly (C) to front of transmission.
2.
Remove clamp bracket (D).
TA249355
Go on to Sheet 2