MASTER CYLINDER AND PEDAL LEVER MOUNT ASSEMBLY REPLACEMENT (Sheet 2 of 3)
Use 9/16 inch wrench to hold two screws (A) and two washers (B).
Using socket and extension, remove two nuts (C) and lockwashers (D). Remove two screws
(A) and washers (B).
Using socket and extension, remove three screws (E), lockwashers (F), and washers (G).
CLEANING AND INSPECTION:
Cleaning agent specified is flammable. Use only in well ventilated areas.
Keep away from flames, sparks, or heat. Do not smoke while using. Prevent
contact with eyes, mouth, and/or skin. Wear rubber gloves when performing
Using drycleaning solvent and rags, clean and dry mount (H).
Go on to Sheet 3