BRAKE PRESSURE GAGE, TUBE ASSEMBLY, REDUCER, AND GASKET REPLACEMENT
(Sheet 4 of 7)
CLEANING AND INSPECTION:
Cleaning agent specified is flammable. Use only in well ventilated areas.
Keep away from flames, sparks, or heat. Do not smoke while using. Prevent
contact with eyes, mouth, and/or skin, Wear rubber gloves when performing
Using rags and dry cleaning solvent,
clean all parts inside and out.
Inspect gage (A) for cracked or broken
glass. Replace if unserviceable.
Inspect brake tube assembly (B) and
tube nuts (C) and (D) for worn
threads, holes, and cracks. Replace
Inspect nut (E) and elbow (F) for worn
threads and cracks. Replace if unservice-
Inspect reducer (G) for worn threads or
Go on to Sheet 5