PARKING BRAKE CABLE ADJUSTMENT (Sheet 4 of 4)
Install parking brake cable clevis (C) to
parking brake lever (D), using pin (B) and
cotter pin (A).
If clevis (C) will not aline with parking
brake lever (D), using two 15/16 inch wrenches,
loosen two nuts (P) and adjust cable until
clevis (C) alines with lever (D). Install
pin (B) and cotter pin (A).
Remove locating pin (K) installed in step 4.
Check parking brake for normal operation.
Install transmission shroud (page 9-6).
Remove blocks from vehicle tracks
End of Task