COVER ASSEMBLY (ESCAPE HATCH) REPAIR (EARLY MODEL) (Sheet 2 of 5)
Using putty knife, remove seal (A) from cover
Using socket head screw key, remove two
internal bolts (C) from plungers (D).
Remove two plungers (D).
Using hammer and punch, remove headless pin
Remove handle assembly (F) from cover (B).
Some cover assemblies do not have
lubrication fittings, if your cover assembly
does not have lubrication fittings, skip
step 6 and go on to step 7.
Using wrench, remove two lubrication fittings
(G) from cover (B).
Go on to Sheet 3