TM 5-5420-202-34
ENGINE LOWER ACCESS COVER REPLACEMENT (Sheet 1 of 2)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
3-4
Installation
3-5
TOOLS: 9/16 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Ratchet with 1/2 in. drive
Putty knife
SUPPLIES:
Gasket
Adhesive (Item 1, Appendix B)
PRELIMINARY
PROCEDURE:
Remove power takeoff gasket (page 3-2)
QUADRANTS REMOVED
REMOVAL:
FOR CLARITY
1.
Using 9/16 socket, remove eight screws
(A) and lockwashers (B) from holes (C).
2.
Using 9/16 socket and extension, remove
six screws (D), lockwashers, (E) and
flat washers (F).
3.
Remove cover (G) and gasket (H).
4.
Using putty knife, scrape off all gasket
and adhesive residue Throw away gasket.
Go on to Sheet 2