TM 5-5420-202-34
POWER TAKEOFF REPLACEMENT (Sheet 7 of 8)
14.
Place clamp (Q) around hose assembly (R).
15.
Using 9/16 inch socket, secure hose assembly (R) and clamp (Q) to power takeoff (A)
with washer (S) and nut (T).
16.
Using 9/16 inch socket, secure power takeoff (A) to engine mounting studs with seven
remaining washers (S) and nuts (T).
17.
Using 9/16 inch wrench, install connector nut (U) of hose assembly (R) onto elbow (V)
at oil inlet port of power takeoff (A).
18.
Using 7/8 inch wrench, install connector nut (W) of hose assembly (X) onto elbow (J)
at outlet port of fuel pump (E).
19.
Using 7/8 inch wrench, install connector nut (Y) of hose assembly (Z) onto elbow (H)
at inlet port of fuel pump (E).
Go on to Sheet 8
3-12