Replacement Engine Installation (Sheet 5 of 17)
Tag air cleaner hoses as they are
removed for later installation.
Using 1/2 inch wrench, remove eight
Remove left air cleaner hose and elbow
assembly (AD) from turbocharger (AE).
Using procedure described in step 17,
remove right air cleaner hose and elbow
Cover all openings to prevent the
entrance of foreign material.
Perform steps 19, 20, and 21 only if you
are replacing a 2D engine.
Remove left and right exhaust ejector
tubes (TM 5-5420-202-20-2) if replacing
a 2DA engine.
Using 7/8 inch wrench, loosen connecting
nut (AF) and connecting nut (AG). Remove
transmission vent line (AH) from transmission.
Go on to Sheet 6