Replacement Engine Installation (Sheet 15 of 17)
Position engine breather tube (AT) and
clamps (AU) and (AV) onto engine.
Using screwdriver, tighten two screws
securing clamps (AU) and (AV).
Connect electrical lead (AW) to solenoid
Position fuel return line (AY) onto
connection on engine, and using 1-1/8 inch
wrench, tighten connector (AZ).
Using hands, position cannon plug (C)
from grommet (D) to connector.
Using spanner wrench, install cannon
plug (C) to connector (BA).
Go on to Sheet 16