TM 5-5420-202-34
FUEL LINES REPLACEMENT - PRIMER PUMP LINES (INLET) (OUTLET) FROM
TO ENGINE COMPARTMENT (Sheet 3 of 4)
INSTALLATION:
1.
Position tube assemblies (A) and (B)
in place.
2.
Using 1/2 inch wrench to hold adapter
(C), use 5/8 inch wrench to connect
tube assembly nut (D).
3.
Using 1/2 inch wrench to hold adapter
(E), use 9/16 inch wrench to connect
tube assembly nut (F).
4.
Position four clamps (G) and (H) on
tube assemblies (A) and (B).
5.
Using 7/16 inch socket, install two
screws (J) and lockwashers (K) securing
four clamps (G) and (H).
6.
Position clamp (L) on tube assembly
(B).
7.
Using 7/16 inch socket and 7/16 inch
wrench, install screw (M), lockwasher
(N), and nut (P) securing clamp (L).
Go on to Sheet 4
4-91
