TM 5-5420-202-34
ACCELERATOR CONTROL LINKAGE ASSEMBLY REPAIR (Sheet 1 of 13)
PROCEDURE INDEX
PROCEDURE
PAGE
Disassembly
4-99
Cleaning
4-104
Inspection and Repair
4-104
Assembly
4-107
TOOLS:
7/16 in. combination box and
1/2 in. socket with 1/2 in. drive
Slip joint pliers
open end wrench
9/16 in. combination box
Deburring stone
and open end wrench
Vise
1/2 in. combination box and
3/8 in. drive pin punch
Scribe
open end wrench
3/16 in. socket head screw key
Pry bar
5/32 in. drive pin punch
Hammer
Flat-tip screwdriver
Ratchet with 1/2 in. drive
SUPPLIES:
Rags (Item 28, Appendix B)
Gloves (Item 31, Appendix B)
Seal
Goggles (Item 32, Appendix B)
Gasket
Preformed packing
Dry cleaning solvent (Item 12, Appendix B)
Woodruff key
Channel brush (Item 2, Appendix B)
Remove accelerator control linkage assembly (page 4-93).
PRELIMINARY PROCEDURE:
Go on to Sheet 2
4-99
