TM 5-5420-202-34
FRONT ACCESSORY HARNESS REPLACEMENT (Sheet 2 of 14)
2.
Follow wire harness (D) to
two cushion clamps (E)
securing harness to ver-
tical post (F) located to
left and forward of driver's
seat.
3.
Using 7/16 inch socket, remove
screws (G), lockwashers (H) and
clamps (E).
4.
Using spanner wrench,
loosen spanner nut (J) at
dimmer switch connector (K).
Disconnect connector (K).
Follow harness assembly
5.
(D) to left front of
vehicle to three clamps
(L), located along bottom
of battery holding bracket.
6.
Using 7/16 inch socket,
remove screws (M), lock-
washers (N), and clamps (L).
Go on to Sheet 3
5-84