FRONT ACCESSORY HARNESS REPLACEMENT (Sheet 5 of 14)
Using 7/16 inch socket, remove screw
(AD), lockwasher (AE), and flat washer
(AF) from one end of two straps (AG).
Using 5/8 inch wrench, remove
nut (AH) and disconnect lead (AJ)
from center battery terminal.
Follow wiring harness assembly (D)
to three straps (AK) between right battery
holding bracket and right headlight
Using 7/16 inch socket, remove three screws (AM), lockwashers (AN), flat washers
(AP), and straps (AK).
Remove five connectors (AQ) from clips on bracket (AR) below right headlight (AL).
Disconnect five connectors (AQ) from leads to right headlight (AL).
Disconnect one connector (AQ) from dummy load.
Go on to Sheet 6