TM 5-5420-202-34
REAR SHIFTING CONTROL ROD REPLACEMENT (Sheet 1 of 2)
TOOLS: 5/8 in. open end wrench (2 required)
PRELIMINARY
PROCEDURES:
Remove right fuel tank (page 4-9)
Remove shifting control rod (page 6-9)
Remove rear shifting linkage shield (page 6-11)
REMOVAL:
1.
Using one 5/8 inch wrench to hold front control rod (A), use another 5/8 inch wrench
and loosen shifting control rod (B).
2.
Remove rod (B) from vehicle.
Go on to Sheet 2
6-16