TM 5-5420-202-34
BRAKE MASTER CYLINDER REPAIR (Sheet 1 of 5)
PROCEDURE INDEX
PROCEDURE
PAGE
Disassembly
8-2
Cleaning and Inspection
8-4
Repair
8-4
Assembly
8-5
TOOLS:
Inside calipers
1-1/8 in. open end wrench
3/8 in. combination box and open end wrench
3/4 in. combination box and open end wrench
Vise
Honing unit set
Electric drill
Flat-tip screwdriver (2 required)
Cross-tip screwdriver
Parts kit
SUPPLIES:
Gloves (Item 31, Appendix B)
Dry cleaning solvent (Item 12, Appendix B)
Goggles (Item 32, Appendix B)
Silicone brake fluid (Item 15, Appendix B)
PRELIMINARY PROCEDURE: Remove master cylinder (TM 5-5420-202-20).
DISASSEMBLY:
NOTE
Tracked vehicle master cylinders are identified with
"TANK" stamped on the mounting flange.
1.
Place master cylinder (A) in vise (B).
Go on to Sheet 2
8-2 Change 2
