TM 5-5420-202-34
BRAKE SLAVE CYLINDER REPAIR (Sheet 1 of 6)
PROCEDURE INDEX
PROCEDURE
PAGE
Disassembly
8-7
Cleaning and Inspection
8-9
Repair
8-9
Assembly
8-10
TOOLS:
3/8 in. combination box and
Knife
open end wrench
Hammer
1/2 in. combination box and
Vise
open end wrench
Flat-tip screwdriver
1 in. open end wrench
Cylinder hone
Drift punch
9/16 in. combination box and
Torque wrench with 3/8 in. drive
open end wrench
0-200 lb-in. (0-23 Nm)
9/16 in. socket with 3/8 in. drive
SUPPLIES:
Parts kit
Masking tape (Item 24,
Dry cleaning solvent (Item 12, Appendix B)
Rags (Item 28, Appendix B)
Gloves (Item 31, Appendix B)
Preformed packing
Goggles (Item 32, Appendix B)
Screw 3/8-16 UNC 2B
Silicone brake fluid (Item 15, Appendix B)
PRELIMINARY PROCEDURE: Remove brake slave cylinder (TM 5-5420-202-20)
DISASSEMBLY:
Place slave cylinder (A) in vise
1.
(B) for disassembly.
Go on to Sheet 2
8-7