BULKHEAD-TO-BRAKE LINE QUICK-DISCONNECT HOSE TUBE ASSEMBLY REPLACEMENT
(Sheet 2 of 3)
Place drip pan or rags under bulkhead
Using 11/16 and 13/16 inch wrenches,
remove tube nut (B) from bulkhead union
Using 11/16 and 9/16 inch wrenches,
remove tube nut (C) from elbow (D).
Using 7/16 inch socket, remove six
screws, washers, and loop clamps (E).
Remove tubing (F) from vehicle.
Check loop clamps for serviceability.
Replace as required.
Position tubing (A) in vehicle.
Using 11/16 inch wrench, install tube
nut (B) to elbow (C).
Go on to Sheet 3