TM 5-5420-202-34
ROADWHEEL ARM REPAIR (NUMBER 1 LEFT AND RIGHT) (Sheet 2 of 7)
Place roadwheel arm assembly on work bench.
1.
Ensure area is clear of combustible materials to prevent fire.
Wear goggles and gloves to prevent injury.
Using oxygen-acetylene gas torches as a heat source, apply heat to spacer (A). Using
2.
hammer and chisel, drive spacer (A) off lower spindle (B) of roadwheel arm (C). Throw
spacer (A) away.
3.
Examine bearing surface of lower spindle (B) for any cuts or marks made during removal
of spacer (A).
40
Using crocus cloth, smooth scratches or marks made on lower
spindle (B) during removal. If there are deep scratches or cuts, turn in roadwheel arm
to depot maintenance.
Go on to Sheet 3
9-3
