TM 5-5420-202-34
ROADWHEEL ARM REPAIR (NUMBERS 2 AND 6 LEFT AND RIGHT) (Sheet 5 of 7)
ASSEMBLY:
3.
Using two persons, position roadwheel arm (C) on arbor press.
4.
Position deflector (D) over road wheel arm upper spindle (E).
5.
Position 6 inch inside diameter drive collar bushing over upper spindle (E) onto deflector
(D) and, using arbor press, drive deflector (D) onto upper spindle (E) of roadwheel arm (C).
NOTE
Seat deflector firmly all the way to
the bottom of the spindle.
Go on to Sheet 6
9-13