STEERING CONTROL ROD REPLACEMENT (Sheet 1 of 2)
5/8 in. combination box and open end wrench (2 required)
Remove left fuel tank (page 4-25)
Remove outer riser link shield at rear of powerplant (TM
Remove rear steering linkage shield and rear control rod
Connecting rod is located at left
Pull shield (A) to rear of vehicle and
Go to crew compartment and locate
left access cover.
Using one 5/8 inch wrench to hold plug
(B) and other 5/8 inch wrench to hold
end of rod (C), remove rod (C).
Go on to Sheet 2