c. Assembly of the MLC 70 Bridge - CONT
(15) Installation of Cable Beam.
(a) Slide cable beam (1) on seat (2)
and (3) located on the inside
girders of far-shore bridge
sections (4) and (5).
(b) Install three bolts (6) in each side
of cable beam (1). Position nuts
(7) between two holes on bolts
(6). Install retaining clip (8)
through outer holes of six bolts
(16) Installation of the Far Shore Second Forward Transverse Brace.
(a) Using four bolts (l), install second forward transverse brace (2) to male and female
bridge sections (3) and (4).
(b) Tighten bolts (1).
2-46 Change 2