NEAR-SHORE RAMP SECTION REPLACEMENT (Sheet 1 of 2)
General Mechanics Tool Box SC 5180-90-N26
Lifting Device (8000 lbs capacity)
Sling, Multiple Leg
Scissoring Cables and attaching hardware removed (pg 3-20).
Flexible Hydraulic Lines (diaphragm) removed (pg 3-32).
REMOVE NEAR-SHORE RAMP SECTION (7).
a. Remove three bolt retainers (1), three
nuts (2), and three bolts (3) securing
diaphragm (4) to the ramp section being
b. Remove four retaining pins (5) from
four locking and connecting pins (6).
Remove four locking and connecting
pins (6) securing ramp section (7) to
center section (8).
c. Using lifting device and sling, separate
ramp section (7) from center section (8)
a distance of about 1 ft.