Table 4-3. Unit Preventive Maintenance Checks and Services (PMCS) for the Interior Bay cont.
Item To Be Inspected
Equipment Is Not
Inspect for ruptured seams, holes punctures
Any defect allowing
and cracked welds.
water into bay cavities.
Ensure connector is correct type.
Incorrect connector type.
Inspect connector, eye bracket, set screws,
Any defect which
spring and spring pins for cracks and
prevents proper seating
Inspect for cracks, broken welds, elongation
Cracks or broken welds
noted. Elongation or
proper seating of
Monthly Bilge Plug
Ensure plug(s) are secured with wire rope to
Any plug missing.
Inspect rubber seal for cuts, elasticity and dry
Check handle operation.
Monthly Lift Pockets and Ensure pin functions property.
Inspect pin for cracks and broken strands on
retaining wire rope.
Inspect pockets for cracks and broken welds.
Inspect posts for cracks at support base,
Broken welds allowing
Posts and Rope cracks/elongation of bolt slots, broken or
water into bay cavity.
deformed rope ring
Inspect rope for frayed or stretched strands.
Posts and rope missing.
Monthly Deck Surface
Inspect for punctures, cracks, tears, dents,
Any damage which
holes and broken welds.
allows water into bay
Check condition of non-skid coating.