TM 5-5420-209-12
4-29. Rear Winch Assembly. - Continued
(63)
(64)
(65)
(66)
(67)
(68)
(69)
(70)
(71)
Install final planet assembly (7) in final drive housing (8).
Install thrust plate (6).
Lubricate preformed packing (5) and install in final drive housing (8) and relubricate preformed packing (5)
with grease.
Install end cover (4) with filler boss located at top of final drive housing (8).
Install snap ring (3) and ensure it is property seated.
Install two pipe plugs (1) and (2).
Check clearance of primary drive housing to drum at two locations 180° (3.14 radians) apart. Clearance
should be equal to within 0.005 in. (0.0127 cm).
Check clearance of final drive housing to drum at two locations 180° (3.14 radians) apart. Clearance should
be equal to within 0.005 in. (0.0127 cm).
Lubricate winch assembly in accordance with LO 5-5420-209-12-1.
4-94