TM 5-5420-209-12
4-78. Rubber Bumper.
This task covers: Replace
INITIAL SETUP
Tool
Equipment Condition:
General Mechanics Automotive Tool Kit
Bay unfolded (Pam. 2-14).
(Item 1, Appendix B)
a. Replace. (figure 4-103)
NOTE
There are two rubber bumpers on each ramp bay. The replace procedures are the same for both.
(1) Remove two nuts (10), washers (2), lockwashers (3), screws(4), and remove rubber bumper(5).
(2) Install rubber bumper(s) and secure with two screws (4), lockwashers (3), washers (2), and
nuts (1).
4-266